front cover of Microwave and RF Design
Microwave and RF Design
A Systems Approach
Michael Steer
The Institution of Engineering and Technology, 2010

front cover of Microwave and RF Design
Microwave and RF Design
A Systems Approach, 2nd Edition
Michael Steer
The Institution of Engineering and Technology, 2013

logo for The Institution of Engineering and Technology
Microwave Circuit Theory and Foundations of Microwave Metrology
Glenn F. Engen
The Institution of Engineering and Technology, 1992
No system in science or engineering can be successfully designed, analysed and specified unless it is backed up by precise quantitative measurements. This is particularly difficult in the field of microwaves where, more often than not, the parameter(s) of interest cannot be observed directly but must be inferred from the measurement of other related parameters. Although the advent of the automated network analyser has eliminated much of the previous drudgery, the problems of interpreting the digitally displayed information still remain. One purpose of this book is to provide the reader with a thorough understanding of the microwave circuit model and its limitations, and thus eliminate the many potential pitfalls that otherwise await the unwary experimenter.
[more]

front cover of Microwave Transmission Line Impedence Data
Microwave Transmission Line Impedence Data
M.A.R. Gunston
The Institution of Engineering and Technology, 1997
A compendium of data for computing the characteristic impedance of transmission lines based on physical dimensions. This book covers both conventional structures and unusual geometries, including coaxial, eccentric and elliptic coaxial, twin-wire, wire-above-ground, microstrip and derivatives, stripline, slabline and trough line. Also details numerous configurations of coupled lines.
[more]

logo for The Institution of Engineering and Technology
Principles of Microwave Circuits
C.G. Montgomery
The Institution of Engineering and Technology, 1987
Principles of Microwave Circuits is an unabridged reprint of the book first published in 1948 by McGraw Hill as Volume 8 of the MIT Radiation Laboratory Series. Since the original publication of this book, a number of errors have been brought to our attention. Corrections of these errors are incorporated in this edition.
[more]

front cover of Ridge Waveguides and Passive Microwave Components
Ridge Waveguides and Passive Microwave Components
J. Helszajn
The Institution of Engineering and Technology, 2000
The ridge waveguide, which is a rectangular waveguide with one or more metal inserts (ridges), is an important transmission line in microwave engineering, through which many passive components can be achieved. As such it is a well-established and widely used element in commercial electronics and communications devices. This book collects together much of the work of Professor Helszajn, an international authoriy in the field, and will enable the reader to have direct access to this material without need for exhaustive search of research papers. Generously illustrated, it is likely to become the definitive reference source on this topic. The book includes closed-form and finite element calculations of the propagation constant, attenuation and mode spectrum for the ridge waveguide, as well as power-current and power-voltage definitions of impedance. Circular polarisation is also treated. Propagation properties where the waveguide has a dielectric filler are calculated. The treatment is then extended to more complex designs, including quadruple ridge waveguides with and without a gyromagnetic filler. The text includes descriptions of many of the passive devices which can be realised using these waveguides, including isolators, phase shifters and circulators. A treatment of the finline waveguide is included as its geometry is closely related to that of the ridge waveguide, leading to components such as the 3-port finline calculator.
[more]


Send via email Share on Facebook Share on Twitter