This well established and authoritative IET Code of Practice provides a clear explanation of electric vehicle charging equipment and installation. It sets out the considerations and planning needed in advance and the necessary physical and electrical requirements during the installation process. It also details what needs to be considered when undertaking electrical work on charging equipment in various different locations - such as domestic dwellings, on-street locations, and commercial and industrial premises.

• Acknowledgments
• Preface
• Section 1: Scope
• Section 2: Overview of EV charging equipment
• Section 3: Arrangements prior to installation commencement
• Section 4: Physical installation requirements
• Section 5: Electrical requirements - General
• Section 6: Dwelling installations
• Section 7: On-street installations
• Section 8: Commercial and industrial installations
• Section 9: Inspection, testing and maintenance requirements
• Section 10: Vehicle as storage
• Section 11: Distribution network operator (DNO) notification
• Section 12: Integration and smart infrastructure
• Appendix A: Charging connectors and charging cable types
• Appendix B: Checklists for dwelling installations
• Appendix C: Checklists for on-street installations
• Appendix D: Checklists for commercial and industrial installations
• Appendix E: Wireless power transfer (WPT) installations
• Appendix F: Installing an earth electrode system to enable use of a PME supply earth, in accordance with Regulation 722.411.4.1(ii) of BS 7671
• Appendix G: Separation of earth electrode zones where a TT (or Mode 4 IT system) is used separate from other earthing arrangements
• Appendix H: Determining a suitable location and voltage tripping threshold for a measurement earth electrode if used for compliance with Regulation 722.411.4.1(iii) of BS 7671
• Appendix I: Installation practices for earth electrodes
• Appendix J: Supply and earthing arrangements for Mode 4 DC EVSE
• Appendix K: Minimum depth of buried cables and height of overhead suspended cables
• Appendix L: Regulatory marking
• Appendix M: Earth fault loop impedance contribution of steel wire armour cables (Annex NA of PD IEC/TR 50480)
• Appendix N: Glossary
• Appendix O: References
• Index